BW-21. Floor loom #3 – plain weave band
Bands Section #3: Floor loom
•
14m
What this project will teach you:
- Simple counterbalance tie-up
- Empty heddles at the edges of the shafts
- Rubber bands to level sheds
- 8 ends per dent (except for the selvedges)
- Taking advantage of a tiny shuttle
- Special way to splice the"fancy" way
- Opening a dense shed with the shuttle
- A view of how the rhythm can look when all is going well
- Discussion of winding the warp on the mill with a cross at each end
- Comparing boat shuttle and band knife weaving technique and appearance
Up Next in Bands Section #3: Floor loom
-
BW-22. Floor loom #4 – Latvian band
What this project will teach you:
- Review of heddles and rubber bands at edges of shafts
- Detailed look at threading with chart
- Un-heddled warp threads
- Weaving pick-up pattern row by row using a chart and pick-up stick
- Picking the un-heddled border
- Tip for remembering pattern row
- Revi... -
BW-23. Floor loom #5 – Skåne band
What this project will teach you:
- 2 sheds, blue wool & white cotton
- My source for this pattern
- Detailed look at the threading with charts
- Pattern made up of groups of 3 warp ends
- Detailed look at treadling order
- Making a clean start to the band
- Plain weave heading
- Weaving techniqu... -
BW-24. Floor loom #6 – Sami band
What this project will teach you:
- Also can be done on Vävstuga bandloom
- My source for this pattern
- This band can be woven quickly
- Explanation of project sheet
- Description of winding warp at the warping mill
- Taking note of the left and right side of the warp, so the chart lines up
- Re...
